Home  /  Guides  /  Floating vs Glue-Down Wood Flooring

Floating vs Glue-Down Wood Flooring: Which Fitting Method?

Installation · Cambridge Floors · Updated November 2026

How a floor is fitted affects how it feels, how it sounds and how well it works with underfloor heating. Engineered wood is usually floated, glued down or nailed. Here is how they compare.

Floating floors

A floating floor is laid over an underlay and joined to itself, not fixed to the subfloor. It is quicker to fit and can go over many existing subfloors.

  • Pros: quicker, less mess, can be lifted, underlay adds sound and moisture protection.
  • Cons: can sound slightly hollow, needs a flat subfloor, and underlay adds insulation that reduces heat from underfloor heating.

Glue-down floors

A glue-down floor is bonded to the subfloor with flexible flooring adhesive across the whole area.

  • Pros: solid, quiet feel underfoot; the best heat transfer over underfloor heating; the standard method for herringbone and chevron.
  • Cons: takes longer, needs a well-prepared, dry and level subfloor, and is harder to lift later.

Secret nailing

On timber joists or a plywood subfloor, boards can be nailed through the tongue so the fixings are hidden. It gives a traditional, solid feel and suits some period homes.

Which method for which floor?

SituationUsual method
Plank floor on a sound, level subfloorFloating or glue-down
Herringbone or chevronGlue-down
Underfloor heatingGlue-down usually preferred
Timber joists or plywoodGlue-down or secret nailed
Flats with acoustic rulesDepends on the building — check the lease

The right method also depends on the product, so we always confirm it with the manufacturer’s guidance.

Subfloor preparation matters most

Whatever the method, the subfloor must be dry, flat and sound. New screeds need time to dry, and older floors may need levelling or repairs first. We check moisture and level before we fit, and allow the boards to settle in the room before fitting. Read more about our wood floor installation and underfloor heating service.

Frequently asked questions

Is it better to float or glue engineered wood flooring?

Both work well. Glue-down feels more solid and is best over underfloor heating; floating is quicker and can be lifted. The subfloor and the product decide which is right.

Can herringbone be floated?

Traditional herringbone and chevron blocks are glued down. Some click systems exist, but glue-down gives the best result.

Do I need an expansion gap?

Yes. Wood moves with humidity, so a gap is left at the edges and covered by skirting or beading.

Call 01223 735677